SiegelSeal N05+ is a premium high-performance 100% silicone sealant with a matte finish. This single part neutral cure silicone is designed to give superior adhesion and durability in a wide range of glazing, weather sealing and trade applications.
Suitable for sealing lap joints, roofing, guttering and cladding applications, providing a weatherproof seal on most building materials such as aluminium, galvanized and zinc coated steel, painted surfaces, glass, brick and concrete.
Carton: 25 x 300ml cartridge Pallet: 48 cartons
| Sealant Type | Neutral Cure Silicone (Oxime) |
| Colours | Grey, Black, White & Translucent |
| Density | 1.35 ± 0.03 g/ml ASTM D792 |
| Shore Hardness A | 30 – ASTM D2240 |
| Tensile Strength | 1.3 N/mm2 |
| Application Temperature | +5°c to +40°c |
| Temperature Resistance | -60°c to +180°c |
| Adhesion-in-Peel | >35N – ASTM C794 |
| Movement Capacity | 30%± – ASTM C719 |
| Elongation At Break | >400% – ASTM D412 |
| Sagging | 0mm – ISO 7390 |
| Skin Formation | 5-10min (23°c and 50% R.H.) |
SiegelSeal N07+ is a premium high-performance 100% silicone sealant which is free from extenders or fillers. This neutral cure silicone is designed to give superior adhesion and durability particularly for application such as portable water, roof & guttering, HVAC and other high movement applications.
Suitable for sealing lap joints, roofing, guttering, façade caulking, cladding applications, waterproofing, HVAC and general weatherseal. Will provide high adhesion onto most building materials such as aluminium, galvanized and zinc coated steel, painted surfaces, glass, brick and concrete.
Carton: 12 x 600ml sausages Pallet: 50 cartons
| Sealant Type | Neutral Cure Silicone (Oxime) |
| Colours | Grey, Translucent |
| Density | 1.03g/ml – ASTM D792 |
| Shore Hardness A | 30 – ASTM C661 |
| Tensile Strength | 1.3 N/mm2 – ASTM D412 |
| Application Temperature | -20°c to +40°c |
| Temperature Resistance | -60°c to +180°c |
| Adhesion-in-Peel | >35N – ASTM C794 |
| Movement Capacity | 50%± – ASTM C719 |
| Elongation At Break | >500% – ASTM D412 |
| Sagging | 0mm – ISO 7390 |
| Skin Formation | 5-10min (23°c and 50% R.H.) |
SiegelSeal N09+ is a premium high-performance alkoxy curing silicone sealant. This formulation is designed specifically for waethersealing and expansion joints, particularly for aluminium panel expansion joints. Formulated to provide extreme primerless adhesion, easy tooling and superior joint service life.
Suitable for sealing butt joints, lap joints and caulk joints. Will adhere suitability onto most building materials such as aluminium, galvanized and zinc coated steel, painted surfaces, glass, brick, concrete and most backing rod styles.
Carton: 12 x 600ml sausages Pallet: 50 cartons
| Sealant Type | Alkoxy Cure Silicone |
| Colours | Black, Grey, White |
| Density | 1.37g/ml – ASTM D792 |
| Shore Hardness A | 30 – ASTM C661 |
| Tensile Strength | 0.5N/mm2 – ASTMD412 |
| Application Temperature | -20°c to +40°c |
| Temperature Resistance | -60°c to +180°c |
| Adhesion-in-Peel | >35N – ASTM C794 |
| Movement Capacity | 100% – ASTM C719 |
| Elongation At Break | >450% – ASTM D412 |
| Sagging | 0mm – ISO 7390 |
| Skin Formation | 20min (23°c and 50% R.H.) |
SiegelSeal S21+ is a premium high-performance neutral cure silicone sealant with active antifungal agents for kitchen, bathroom and wet area application. This 100% silicone formulation is designed to give good general performance for wet area sealing with superior antifungal properties for longer service life.
Will provide strong adhesion to a wide range of wet area construction materials and will not corrode adjacent materials. Suitable for use in frequently wet areas resisting mould and mildew growth.
Carton: 25x300ml cartridges Pallet: 48 cartons
| Sealant Type | Neutral Cure Silicone |
| Colours | Colour Translucent |
| Density | 1.37g/ml 1.01g/mlT ASTM D792 |
| Shore Hardness A | 30 25 ASTM C661 |
| Tensile Strength | 1.3 N/mm2 ASTM D412 |
| Application Temperature | -20°c to +40°c |
| Temperature Resistance | -60°c to +180°c |
| Adhesion-in-Peel | >35N ASTM C794 |
| Movement Capacity | 50%± ASTM C719 |
| Elongation At Break | >450% ASTM D412 |
| Sagging | 0mm ISO 7390 |
| Skin Formation | 5-10min(23°c and 50% R.H.) |
