COLOUR: Black
VOLUME:
High Grab Industrial Adhesive
| Sealant Type | Silane Modified Polymer |
|---|---|
| Colour | White |
| Density | 1.60 g/ml ASTM D792 |
| Shore Hardness A | 80 ASTM C661 |
Substrates must be clean and free of dust and grease. Cut tip off cartridge and cut the nozzle off at the desired bead width. Fit the nozzle to cartridge and place in caulking gun. Pump the adhesive in beads or layers on the substrate. Press the substrates together within the open time some applications may need physical fastening until cured. Clean up Sealant with mineral turpentine within skin time. Cured material can be removed mechanically.
| Sealant Type | Silane Modified Polymer | |
| Colour | White | |
| Density | 1.60 g/mL | ASTM D792 |
| Shore Hardness A | 80 | ASTM C661 |
| Tensile Strength | 3.10 N/mm² | ASTM D412 |
| Tear Strength | 13 N/mm² | ASTM D412 |
| Elongation at Break | 100% | ASTM D412 |
| VOC Content | 2.1 g/L | |
| Skin Formation | 10 minutes | (23°c and 50% R.H) |
| Tack Free Time | 30 minutes | |
| Curing Speed | 3mm / 24 hours | |
| Application Temperature | +5°c to +50°c | |
| Temperature Resistance | -40°c to +110°c | |
| Sagging | 0mm | ISO 7390 |
| Effect of Heat Aging | 0.5% Weight loss | ASTM C920 (8.10) |
| Cracking – None Chalking – None |
||
| Effect of Accelerated Weathering | UV exposure – no cracking Cold temp. – no cracking |
ASTM C920 (8.11) |
| Staining or Colour Change | None | ASTM C920 (8.8) |
Access Technical Data Sheets, Safety Data Sheets and expert recommendations from our technical team.
Access Technical Data Sheets, Safety Data Sheets and expert recommendations from our technical team.
Speak to Technical Team