SiegelBond M40

High Grab Shower Adhesive & Sealant

SKU: SBM40

Suitable For

  • Showers
  • Basins
  • Baths
  • Panels
  • Acrylic Bathroom Products
Low VOC
High Grab
SiegelBond M40 is a solvent free high grab adhesive and sealant for lifetime bonding performance in the installation of showers, basins, baths,panels and other acrylic bath room products. This formula slow VOC certified and solvent free for safe working environments and green star ratings. Engineered to provide high initial grab and extreme bonding strength for lifetime performance.
Sealant Type Silane Modified Polymer
Colour Grey, Black, White
Density 1.40g/ml ASTM D792
Sheen Full Sheen

 

SiegelBond M40 is a solvent free high grab adhesive and sealant for lifetime bonding performance in the installation of showers, basins, baths,panels and other acrylic bath room products. This formula slow VOC certified and solvent free for safe working environments and green star ratings. Engineered to provide high initial grab and extreme bonding strength for lifetime performance.
  • Primerless Adhesion
  • Lifetime Bonding Performance
  • Excellent Dynamic Flexibility
  • Maximum UV & Weathering Resistance
  • Non-shrinking
  • Non-slumping
  • High Grab
  • Rapid Cure
  • Paintable

Instructions: Remove a sausage of SiegelBond M40 from the carton and place in the sausage gun. Holding the sausage gun upright, use side cutter or a knife to cut the metal crimp off one end of the sausage. Cut a nozzle down to the desired nozzle diameter and place in the nozzle clasp and screw on the end of the gun. Pump the sealant in vertical lines at 100mm spacing for panel bonding. SiegelBond M40 must be tooled or pressed into with light pressure within 5 minutes post-application to spread the material against the joint surface for a professional finish. For butt joints, SiegelBond M40 should be applied to a joint of at least 5x5mm, and bigger joints have a width to depth ratio of about 2:1. SiegelBond M40 in its uncured state can be cleaned with solvent. When cured it is very difficult to remove.

Certified & Approved

  • Greenstar Low VOC Compliant
Sealant Type Silane Modified Polymer
Colour Grey, Black, White
Density 1.40g/ml ASTM D792
Sheen Full Sheen
Shore Hardness A 35 ASTM C661
Tensile Strength 2.20 N/mm² ASTM D412
Tear Strength 12 N/mm² ASTM D412
Application Temperature +5°c to +50°c
Temperature Resistance -40°c to +110°c
Low VOC Compliance Yes GBCA Greenstar Compliant
VOC Content 18 grams / Litre ASTM D3960-05
Curing Speed 3mm / 24 hours 23°c and 50% R.H
Elongation at Break 600% ASTM D412
Movement Capacity 25% ± ASTM C719
Sagging 0mm ISO 7390
Skin Formation 5-10 minutes 23°c and 50% R.H
Tack Free Time 30-45 minutes
Effect of Heat Aging 0.5% Weight loss ASTM C920 (8.10)
Cracking – None
Chalking – None
Effect of Accelerated Weathering UV exposure – no cracking ASTM C920 (8.11)
Cold temp. – no cracking
Staining or Colour Change None ASTM C920 (8.8)
0 Reviews

What Our Customers Are Saying

5
0
4
0
3
0
2
0
1
0
REVIEWS (0)
Write a Review
Add a review

Your email address will not be published. Required fields are marked *

Your rating *

  • Australian Owned
  • Technical Support
  • Fast Dispatch
  • Bulk Supply Available
  • Commercial Grade Tested

Related Products

Need help selecting the right product?

Access Technical Data Sheets, Safety Data Sheets and expert recommendations from our technical team.

Anything else to discuss?

Access Technical Data Sheets, Safety Data Sheets and expert recommendations from our technical team.

Speak to Technical Team