SiegelSeal N08+

High Performance Low Modulus Silicone Sealant

SKU: SSN08-600ML

SELECT VOLUME: Pallet

SELECT COLOUR: Matte Black

Suitable For

  • Expansion Joints
  • Façade
  • Caulking
  • Perimeter Sealing
  • Hardstand and Armour Joints
25 Year Warranty
Low VOC
Low Modulus Silicone
SiegelSeal N08+ is a premium low modulus neutral curing silicone for lifetime performance in high movement and dynamic joint sealing application. This Oxime curing silicone has excellent adhesion, high dynamic movement capacity and exceptional UV and weathering properties for control and expansion joints, façade caulking, perimeter sealing, hardstand and armour joints and other sealing applications.
Sealant Type Neutral Oxime Cure Silicone
Colour Colours
Density 1.34 ± 0.03 g/ml ASTM D792
Sheen Matte Colours
SiegelSeal N08+ is a premium low modulus neutral curing silicone for lifetime performance in high movement and dynamic joint sealing application. This Oxime curing silicone has excellent adhesion, high dynamic movement capacity and exceptional UV and weathering properties for control and expansion joints, façade caulking, perimeter sealing, hardstand and armour joints and other sealing applications.
  • Excellent Adhesion Properties
  • Low Modulus
  • Non-corrosive
  • Maximum UV & Weathering Resistance
  • Non-shrinking
  • Non-slumping
  • Excellent Tooling Characteristics
  • Smooth Matte Finish

SiegelSeal N08+ is engineered to give lifelong performance in demanding applications such as control and expansion joints, façade caulking, perimeter sealing, hardstand and armour joints and other sealing applications.

Instructions: Remove a sausage of SiegelSeal N08+ from the carton and place in the sausage gun. Holding the sausage gun upright, use side cutter or a knife to cute the metal crimp off one end of the sausage. Cut a nozzle down to the desired nozzle diameter and place in the nozzle clasp and screw on the end of the gun. Ensure the surface is correctly prepared or primed. Pump the silicone as required. SiegelSeal N08+ must be tooled with light pressure within 5 minutes post-application to spread the material against the joint surface for a professional finish. For but joints, SiegelSeal N08+ should be applied to a joint of at least 5x5mm, and bigger joints have a width to depth ratio of about 2:1. SiegelSeal N08+ in its uncured state can be cleaned with solvent. When cured it is very difficult to remove.

Certified & Approved

  • Greenstar Low VOC Compliant
Sealant Type Neutral Oxime Cure Silicone
Colour Colours
Density 1.34 ± 0.03 g/ml ASTM D792
Sheen Matte Colours
Shore Hardness A 22 ASTM D2240
Tensile Strength 1.5 N/mm² ASTM D412
Application Temperature +5°c to +50°c
Temperature Resistance -60°c to +180°c
Smoke Point 220°c +/-
Low VOC Compliance Yes GBCA Greenstar Compliant
VOC Content 25 grams / litre ASTM D3960-05
Curing Speed 3mm / 24 hours (23°c and 50% R.H)
Movement Capacity -50% / +100% ASTM C719
Elongation at Break ≥800% ASTM D412
Sagging 0mm ISO 7389
Skin Formation 5 -10 minutes (23°c and 50% R.H)
0 Reviews

What Our Customers Are Saying

5
0
4
0
3
0
2
0
1
0
REVIEWS (0)
Write a Review
Add a review

Your email address will not be published. Required fields are marked *

Your rating *

  • Australian Owned
  • Technical Support
  • Fast Dispatch
  • Bulk Supply Available
  • Commercial Grade Tested

Related Products

Need help selecting the right product?

Access Technical Data Sheets, Safety Data Sheets and expert recommendations from our technical team.

Anything else to discuss?

Access Technical Data Sheets, Safety Data Sheets and expert recommendations from our technical team.

Speak to Technical Team