SiegelGlaze S350+

Two Component Polysulfide Secondary Sealant

SKU: SGS350

Suitable For

  • Insulated Glass
  • Aluminum
  • Stainless-steel
High Purity Silicone Monomer
Excellent Adhesion
SiegelGlaze S350+ is a high performance two-component secondary sealant for insulated glass units requiring higher long term UV and structural performance. Formulated from a high purity silicone monomer base, this sealant possesses excellent adhesion to glass, aluminum and stainless-steel materials and provides exceptional argon retention properties.
Sealant Type Two Component Silicone
Colour Comp. A Light Grey Comp. B Black
Density Comp. A 1.56 – 1.60 kg / L Comp. B 1.01 – 1.05 kg / L
Mix Ration A:B by volume 10:1.00
SiegelGlaze S350+ is a high performance two-component secondary sealant for insulated glass units requiring higher long term UV and structural performance. Formulated from a high purity silicone monomer base, this sealant possesses excellent adhesion to glass, aluminum and stainless-steel materials and provides exceptional argon retention properties.
  • Long-Term UV Performance
  • Excellent IG Adhesion
  • Exceptional Vapor Resistance
  • Exceptional Argon Permeability
  • Consistent Application
  • Excellent Cold Stability

Surface Preparation: Surface of both glass substrates must be dry, clean and free of oil

Curing: Cold curing time is 80-120 minutes at 23°Celcius and RH 50%. Reducing application temperature will in increase curing rate. Increasing application temperature will decrease curing rate.

Mix ration can be adjusted by a variance of +/- 20% (B Comp. only)

Pot Life: Sealant should be used within 40-60 minutes based on an ambient environment of 23°Celcius and RH 50%. Reducing application temperature will in increase pot life. Increasing application temperature will decrease pot life.

Sealant Type Two Component Silicone
Colour       Component A Light Grey
      Component B Black
Density       Component A 1.56 – 1.60 kg / L
      Component B 1.01 – 1.05 kg / L
Mix Ration       A:B by volume 10:01.00
Cold Cure Time 30 – 60 minutes 23°Celcius at RH 50%
Elongation at Break 100% ISO 11600
Shore Hardness A  >30 at 24 hours ISO 868
Packaging       Component A 191 L
      Component B 19 L
VOC < 1g per Litre
MVTR (Moisture Vapour Transmission Rate) 7.0 gr / 24h / m² EN1279-4 part 5.2 and 5.3
Argon Penetration Rate 0.80 g / h m² EN1279-4 part 5.2 and 5.3
Tensile Strength 0.5 N/mm² ISO 11600
0 Reviews

What Our Customers Are Saying

5
0
4
0
3
0
2
0
1
0
REVIEWS (0)
Write a Review
Add a review

Your email address will not be published. Required fields are marked *

Your rating *

  • Australian Owned
  • Technical Support
  • Fast Dispatch
  • Bulk Supply Available
  • Commercial Grade Tested

Related Products

Need help selecting the right product?

Access Technical Data Sheets, Safety Data Sheets and expert recommendations from our technical team.

Anything else to discuss?

Access Technical Data Sheets, Safety Data Sheets and expert recommendations from our technical team.

Speak to Technical Team