SiegelGlaze PS200

Polysulfide Secondary Sealant

SKU: SGPS200
TDS

Suitable For

  • Insulated Glass
  • Aluminum
  • Stainless-steel
Polysulfide Monomer Base
Excellent Adhesion
SiegelGlaze PS200 is a high performance two-component secondary sealant for insulated glass manufacturing. Formulated on a Polysulfide Monomer base, this sealant possesses excellent adhesion to glass, aluminum and stainless-steel materials. This formulation provides a higher level of chemical, moisture and gas resistance guaranteeing the highest level of argon retention and lower level of moisture penetration. The inherent properties of a polysulfide IGU seal particularly in extreme cold means better overall performance and physical stability of the cured seal.
Sealant Type Polysulfide Monomers
Colour Comp. A Light Grey Comp. B Black
Density Comp. A 1.80 – 184 kg / L Comp. B 1.62 – 1.70 kg / L
Mix Ration A:B by weight 10:0.92 A:B by volume 10:1.00
SiegelGlaze PS200 is a high performance two-component secondary sealant for insulated glass manufacturing. Formulated on a Polysulfide Monomer base, this sealant possesses excellent adhesion to glass, aluminum and stainless-steel materials. This formulation provides a higher level of chemical, moisture and gas resistance guaranteeing the highest level of argon retention and lower level of moisture penetration. The inherent properties of a polysulfide IGU seal particularly in extreme cold means better overall performance and physical stability of the cured seal.
  • Excellent IG Material Adhesion
  • Resistance to Vapour & Argon Permeability
  • Consistent Application
  • Extreme Cold Stability

Surface Preparation: Surface of both glass substrates must be dry, clean and free of oil.

Curing: Cold curing time is 80-100 minutes at 23°Celcius and RH 50%. Reducing application temperature will in increase curing rate. Increasing application temperature will decrease curing rate.

Mix ration can be adjusted by a variance of +/- 20% (B Comp. only).

Pot Life: sealant should be used within 40-50 minutes based on an ambient environment of 23°Celcius and RH 50%. Reducing application temperature will in increase pot life. Increasing application temperature will decrease pot life.

Sealant Type Polysulfide Monomers
Colour       Component A Light Grey
      Component B Black
Density       Component A 1.80 – 184 kg / L
      Component B 1.62 – 1.70 kg / L
Mix Ration       A:B by weight 10:0.92
      A:B by volume 10:1.00
Cold Cure Time 80 – 100 minutes 23°Celcius at RH 50%
Pot Life 40 – 50 mins 23°Celcius at RH 50%
Hardness Shore A >40 at 24 hrs. 23°Celcius at RH 50%
Packaging      Component A 191 L
     Component B 19 L
VOC < 1g per Litre
MVTR (Moisture Vapour Transmission Rate) 6.3 gr / 24h / m² EN1279-4 part 5.2 and 5.3
Argon Penetration Rate 0.0002 g / h m² EN1279-4 part 5.2 and 5.3
Glass to Glass Adhesion Test >10mins at 0.3 MPa H Testing under 7kg/F
0 Reviews

What Our Customers Are Saying

5
0
4
0
3
0
2
0
1
0
REVIEWS (0)
Write a Review
Add a review

Your email address will not be published. Required fields are marked *

Your rating *

  • Australian Owned
  • Technical Support
  • Fast Dispatch
  • Bulk Supply Available
  • Commercial Grade Tested

Related Products

Need help selecting the right product?

Access Technical Data Sheets, Safety Data Sheets and expert recommendations from our technical team.

Anything else to discuss?

Access Technical Data Sheets, Safety Data Sheets and expert recommendations from our technical team.

Speak to Technical Team