SuperLevel PRO

Professional Self Levelling Compound

CT C25 F9 | 1.5 to 20mm

• Super Smooth Finish
• Ultra Fast Curing
• Superior Flow
• Interior Use
• Hand or Pump Application

Product Description

SuperLevel PRO is a fast-setting, professional self-levelling compound designed for refurbishing existing commercial and
domestic interior floors. It can be applied by hand or pump to level, smooth, and fill thickness variations from a feather edge
up to 20mm per application on sound, rigid subfloors. This compound offers good resistance to loads, making it suitable for
areas with wheelchair traffic, and for use with underfloor and under-tile heating systems.

Application

Apply SuperLevel PRO in one coat from Feather Edge up to 20mm with a large metal trowel or squeegee, keeping the
trowel slightly inclined to obtain the desired thickness. Drying time at 20°c is approx 24 hours. Abrading using 40-60 grit
sanding paper improves both the surface quality and the absorbency. Poor air-flow and lower temperatures will significantly
affect drying times. When a second coat of SuperLevel PRO is required, it must be applied as soon as the first

Application Data

Description	Value
Specific Gravity of Mix (kg/m3)	2100
Dry Solids Content	100%
Mixing Ratio	4.4-4.6L of clean water per 20kg bag
Thickness Per Coat	from 1.5 to 20 mm (minimum of 3 mm before the installation of timber floors)
Self Levelling	Yes
pH of Mix	Approx. 12
Application Temp Range	from +5°C to +35°C
Open Time	20-30 minutes
Set to light foot traffic:	3 hours
VOC Content	<0.3 mg/m3
Time before laying flooring:	12 hours (24 hours for wooden floors)

Technical Information

Description	Value
Compressive strength (N/mm²)
After 1 Day	15.0
After 7 Day	22.0
After 28 Day	28.0
Flexural strength (N/mm²)
After 1 Day	5.0
After 7 Day	6.0
After 28 Day	9.0
Resistance to abrasion TABER Abrasimer	2.5

Health & Safety

Cement, when mixed with water or latex, may result in a corrosive solution to eyes and skin. If splashed in eyes of skin, flush thoroughly with water. Do not take internally. If ingested, drink 1-2 glasses of water to dilute. Do not induce vomiting. Consult a physician or poison control centre immediately. In the event of chemical emergency, spill, leak, exposure or accident, in Australia, contact: Australian Poisons information centre:
24 hour service- 13 11 26
Police or Fire Brigade - 000
New Zealand poisons information centre
Phone: 1800 POISON (1800 764766)