SuperLevel FLEXI

Flexible Self Levelling Compound

CT C40 F8 | 1.5 to 40mm

• Fibre Reinforced
• Smooth Finish
• High Compressive Strength
• Interior & Exterior Use
• Hand or Pump Application

TDS MSDS

Product Description

SuperLevel FLEXI is a rapid-setting, professional self-levelling compound expertly crafted for the refurbishment of both
commercial and residential floors. 1 Its versatile formulation allows for hand or pump application, effortlessly levelling,
smoothing, and filling thickness variations from a feather edge up to 40mm. This robust compound adheres effectively to a
wide range of interior and exterior subfloors, including concrete, cement, timber, and even rubber underlays. Engineered for
durability, SuperLevel FLEXI offers excellent resistance to loads, making it ideal for areas with wheelchair traffic and
underfloor or under-tile heating systems.

Application

Apply SuperLevel FLEXI in one coat from Feather Edge up to 40mm with a large metal trowel or squeegee, keeping the
trowel slightly inclined to obtain the desired thickness. Drying time at 20°c is approx 24 hours. Abrading using 40-60 grit
sanding paper improves both the surface quality and the absorbency. Poor air-flow and lower temperatures will significantly
affect drying times. When a second coat of SuperLevel FLEXI is required, it must be applied as soon as the first one is ready
for traffic (approx. 4-6 hours at +20 C), or if allowed to completely dry the floor must be reprimed.

Application Data

Description	Value
Specific Gravity of Mix (kg/m3)	2100
Dry Solids Content	100%
Mixing Ratio	4.6-4.8L of clean water per 20kg bag
Thickness Per Coat	from 1.5 to 40 mm (minimum of 3 mm before the installation of timber floors)
Self Levelling	Yes
pH of Mix	Approx. 12
Application Temp Range	from +5°C to +35°C
Open Time	20-30 minutes
Set to light foot traffic:	2 hours
VOC Content	<0.3 mg/m3
Time before laying flooring:	12 hours (24 hours for wooden floors)

Technical Information

Description	Value
Compressive strength (N/mm²)
After 1 Day	15.0
After 7 Day	25.0
After 28 Day	40.0
Flexural strength (N/mm²)
After 1 Day	5.0
After 7 Day	7.0
After 28 Day	8.0
Resistance to abrasion TABER Abrasimer	2.5

Health & Safety

Cement, when mixed with water or latex, may result in a corrosive solution to eyes and skin. If splashed in eyes of skin, flush thoroughly with water. Do not take internally. If ingested, drink 1-2 glasses of water to dilute. Do not induce vomiting. Consult a physician or poison control centre immediately. In the event of chemical emergency, spill, leak, exposure or accident, in Australia, contact: Australian Poisons information centre:
24 hour service- 13 11 26
Police or Fire Brigade - 000
New Zealand poisons information centre
Phone: 1800 POISON (1800 764766)