SuperLevel PRO

Professional Self Levelling Compound

SKU: SLPRO

Suitable For

  • Heavy Loads
  • Wheelchair Traffic Floors
  • Under-floor Heating Systems
  • Under-tile Heating Systems
25 Year Warranty
Fast Setting
SuperLevel PRO is a fast-setting, professional self-levelling compound designed for refurbishing existing commercial and domestic interior floors. It can be applied by hand or pump to level, smooth, and fill thickness variations from a feather edge up to 30mm per application on sound, rigid subfloors. This compound offers good resistance to loads, making it suitable for areas with wheelchair traffic, and for use with underfloor and under-tile heating systems.
Specific Gravity of Mix (kg/m3) 2100
Dry Solids Content 100%
Mixing Ratio 4.6-4.8L of clean water per 20kg bag
Thickness Per Coat From 1.5 to 30mm
Self Levelling Yes
pH of Mix Approx. 12
Application Temp Range from +5°C to +35°C
Open Time 20-30 minutes
SuperLevel PRO is a fast-setting, professional self-levelling compound designed for refurbishing existing commercial and domestic interior floors. It can be applied by hand or pump to level, smooth, and fill thickness variations from a feather edge up to 30mm per application on sound, rigid subfloors. This compound offers good resistance to loads, making it suitable for areas with wheelchair traffic, and for use with underfloor and under-tile heating systems.
  • Super Smooth Finish
  • Ultra Fast Curing
  • Superior Flow
  • Interior Use
  • Hand or Pump Application

Apply SuperLevel PRO in one coat from Feather Edge up to 30mm with a large metal trowel or squeegee, keeping the trowel slightly inclined to obtain the desired thickness. Drying time at 20°c is approx 24 hours. Abrasing using 40-60 grit sanding paper improves both the surface quality and the absorbency. Poor air-flow and lower temperatures will significantly affect drying times. When a second coat of SuperLevel PRO is required, it must be applied as soon as the first one is ready for traffic (approx. 4-6 hours at +20 C), or if allowed to completely dry the floor must be reprimed.

Application Data

Specific Gravity of Mix (kg/m3) 2100
Dry Solids Content 100%
Mixing Ratio 4.6-4.8L of clean water per 20kg bag (Mix ratio can be increased up to 5L)
Thickness Per Coat From 1.5 to 30mm (minimum of 3 mm before the installation of timber floors)
Self Levelling Yes
pH of Mix Approx. 12
Application Temp Range From +5°C to +35°C
Open Time 20-30 minutes
Set to light foot traffic 3 hours
VOC Content <0.3 mg/m3
Time before laying flooring: 12 hours (24 hours for wooden floors)

Technical Information

Compressive strength (N/mm²)
After 1 Day 15.0
After 7 Days 22.0
After 28 Days 30.0
Flexural strength (N/mm²)
After 1 Day 5.0
After 7 Days 6.0
After 28 Days 9.0
Resistance to abrasion TABER Abrasimer 2.5 (After 28 Days)

 

0 Reviews

What Our Customers Are Saying

5
0
4
0
3
0
2
0
1
0
REVIEWS (0)
Write a Review
Add a review

Your email address will not be published. Required fields are marked *

Your rating *

  • Australian Owned
  • Technical Support
  • Fast Dispatch
  • Bulk Supply Available
  • Commercial Grade Tested

Related Products

Need help selecting the right product?

Access Technical Data Sheets, Safety Data Sheets and expert recommendations from our technical team.

Anything else to discuss?

Access Technical Data Sheets, Safety Data Sheets and expert recommendations from our technical team.

Speak to Technical Team