Siegel Consolidated Product & System Warranty
Warranty – Variables and Coverage
Siegel Pty Ltd ABN 35 609 511 542 (Siegel/We) warrants that each product listed below (Product) will be covered by this warranty (Warranty) and maintain its warranted integrity for the applicable Product warranty period specified in the below table from the date of initial installation or application (Warranty Period), subject to the terms and conditions of this document.
The Products are designed for use in applicable Siegel product and flooring systems, delivering performance, speed, and reliability for professional installers from the subfloor up and across the relevant application system. Sealant Products are engineered for long-term durability, flexibility, physical integrity, and resistance to UV, weather and time under normal environmental exposure. Flooring system Products are engineered to remain securely bonded and free from cracking, crumbling, delamination and material degradation when used only with required Siegel components.
Leave a legacy. Do the unseen well.
In the below table:
‘Product Warranty‘ means Siegel’s warranty that a Product will maintain its warranted integrity for the Product Warranty Period specified in the table below, subject to the terms of this document. For sealants, this includes maintaining flexibility and physical integrity under normal environmental exposure and remaining free from cracking, crumbling, chalking or material breakdown, subject to the terms of this document. Essentially, this relates to the manufacturing defect cover for the product itself.
‘System Warranty‘ means Siegel’s warranty, where a System Warranty Period is specified in the table below, that the applicable Siegel System will perform as intended, including the compatibility of its components, secure bonding, and freedom from cracking, crumbling, delamination or material degradation, for the System Warranty Period, provided all components and installation conditions required by Siegel for that Siegel system have been satisfied. The System Warranty extended cover that applies only when the Product is installed as part of a complete Siegel system (all required Siegel components with correct installation conditions).
Unless a System warranty is expressly specified below, the Warranty is limited to the Product’s own warranted integrity and expressly excludes adhesion to any substrate or surface.
Category |
Product |
Pack / Unit |
Product Warranty |
System Warranty |
Timber Flooring Adhesives |
SiegelBond PRO70 | Pail 9.68L | 25 years | 25 years |
| SiegelBond PRO70 Sausage | Sausage 600mL | 25 years | 25 years | |
| SiegelBond PRO95 | Pail 11.9L | 25 years | 25 years | |
| SiegelBond PRO95 Sausage | Sausage 600mL | 25 years | 25 years | |
| SiegelBond PRO98 | Pail 11.11L | 25 years | 25 years | |
Resilient Flooring Adhesives |
SiegelBond T30 | Pail 15kg | 10 years | 25 years |
| SiegelBond T35 | Pail 14kg | 10 years | 25 years | |
| SiegelBond T40 | Pail 15kg | 10 years | Not applicable | |
| SiegelBond T45 | Pail 15kg | 25 years | 25 years | |
| SiegelBond PS50 | Pail 15kg | 10 years | Not applicable | |
| SiegelBond C60 | Pail 15kg | 10 years | Not applicable | |
Moisture Barrier & Surface Primer |
SiegelProof P12 | 1K, Single Unit | 10 years | 25 years |
| SiegelProof PRO2K | 2K Epoxy Kit | 10 years | 25 years | |
| SiegelPrime P10 | Concentrate | 10 years | 25 years | |
| SiegelPrime NP60 | Ready to Use | 10 years | 25 years | |
Self-Levelling & Smoothing |
SuperFinish RAPID | Pail 9kg | 10 years | 25 years |
| SuperLevel TOP | 20kg bag / Pallet FIS (64) | 10 years | 25 years | |
| SuperLevel ECO | 20kg bag / Pallet FIS (64) | 10 years | 25 years | |
| SuperLevel PRO | 20kg bag / Pallet FIS (64) | 10 years | 25 years | |
| SuperLevel FLEXI | 20kg bag / Pallet FIS (64) | 10 years | 25 years | |
Timber Coating Systems |
SiegelCoat 2K (Gloss/Matte/Satin) | Kit (MOQ 3) | 10 years | Not applicable |
| SiegelCoat 2K Invisible | Kit (MOQ 3) | 10 years | Not applicable | |
| SiegelCoat Sealer | Pail (MOQ 4) | 10 years | Not applicable | |
| Wet Edge Extender | Bottle (MOQ 12) | 10 years | Not applicable | |
| Anti-Slip Powder | Bottle (MOQ 12) | 10 years | Not applicable | |
| Whitener | Bottle (MOQ 30) | 10 years | Not applicable | |
Trowel |
SiegelBond Trowel | Carton of 12 | 1 year | Not applicable |
| SiegelBond Trowel | Per Trowel | 1 year | Not applicable | |
Tile Adhesive |
SiegelBond XT20 | 20kg bag | 10 years | Not applicable |
| SiegelBond XT22 | 20kg bag | 10 years | Not applicable | |
| SiegelBond XT24 | 20kg bag | 10 years | Not applicable | |
Sealants |
SiegelSeal N05+ | Cartridge / Full Pallet (48) | 25 years | 25 years |
| SiegelSeal N07+ | Cartridge / Full Pallet (48) | 25 years | 25 years | |
| SiegelSeal N07+ Sausage | Sausage 600mL / Carton (12) | 25 years | 25 years | |
| SiegelSeal N08+ SiegelSeal N09+ SiegelSeal N12+ SiegelSeal S21 | Cartridge / Full Pallet (48)
25 years 25 years |
25 years | 25 years |
Warranty Coverage
This Warranty applies only when:
- the Product has been purchased directly from Siegel;
- the Product in question was within shelf life and correctly stored before use;
- the initial installation or application follows Siegel’s published technical data sheets (TDS), installation instructions, applicable system guides and relevant Australian Standards;
- the substrate, surface or application area is dry, stable, clean, compatible and structurally sound;
- the Product is not tampered with; and
- the flooring installation, coating, sealant, levelling, smoothing or other application is protected from moisture ingress, substrate movement, excessive movement, harsh chemical exposure or attack, structural failure, prolonged water immersion, and other conditions outside the Product’s published use parameters.
This Warranty only applies to the original purchaser of the Products where the Products for the initial installation or application are delivered to an Australian or New Zealand delivery address and remain in Australia or New Zealand for the life of the product. You cannot assign or transfer any benefit conferred by this Warranty. All subsequent purchasers acquire the Products ‘as is’ and without the protection of the Warranty.
Warranty Remedy
If a failure occurs due to a proven defect in any of the Products, or in an eligible Siegel system where a System Warranty is specified above, within the applicable Warranty Period, Siegel will, at its sole discretion:
- replace the defective Product free of charge; or
- refund the original purchase price of the Product.
Warranty Exclusions
This Warranty does not cover:
- failures caused by substrate movement, deflection, structural failure, incorrect sealant joint design, substrate incompatibility or poor site conditions;
- incorrect substrate or surface preparation, priming, mixing, curing, coating, open time, tack-up time or drying times;
- damage from moisture ingress, leaks, or rising damp;
- incompatible substrates, coverings, coatings, finishes, timber treatments, contaminants, non-Siegel components, non-approved components or other products not approved by Siegel;
- installations or applications not following Siegel’s instructions;
- failure to satisfy the ‘Warranty Coverage’ requirements in this document; and
- normal wear, misuse, aesthetic deterioration, discolouration, staining, fading caused by UV exposure or environmental conditions, chemical exposure or attack, mechanical or external impact, excessive movement, prolonged water immersion or environmental damage.
Warranty Registration
To activate the Warranty, the original purchaser of the Product must submit the Siegel Warranty Registration Form within 30 days of installation or application, including:
- Product, Product batch numbers and quantities;
- project address and installer details;
- photos of substrate or surface preparation and Product installation or application; and
- declaration that the Products, and any applicable Siegel system components, were used as specified, and permission for Siegel’s representatives to inspect the Products and application to confirm compliance;
- permission for Siegel’s representatives to inspect the Products, installation or application to confirm compliance.
A Siegel Warranty Certificate will be issued upon approval.
Making a Claim
Siegel must be notified of any defect within 14 days of the defect occurring by submitting in writing to [email protected] the following:
- proof of purchase;
- Warranty certificate number;
- site address and contact details;
- photos or supporting documentation of the issue; and
- access for Siegel’s representatives to inspect the site and verify the issues.
Siegel reserves the right in its absolute discretion to determine whether the Products, or any applicable Siegel system, have failed due to a defect. The Warranty does not apply to any freight, call-out fees, labour and other items associated with making a claim under this Warranty where the claim is an invalid warranty claim. If the claim is a valid warranty claim, then Siegel will only be liable for the costs that it has pre-approved in writing, where pre-approval must be obtained by you prior to you incurring those costs. All costs for which pre-approval in writing is not obtained by you in accordance with this paragraph are excluded from this Warranty and they will be charged to you at standard Siegel rates.
Disclaimer
To the extent permitted by law, all other warranties implied or otherwise not set out in this Warranty are excluded and Siegel will be under no liability in contract, tort (including without limitation, negligence, or breach of statutory duty) to otherwise compensate the party eligible to make a warranty claim for:
- any increased profits or expenses; and
- any loss of profit, revenue, business, contracts or anticipated savings; and
- any loss or expense resulting from a claim by a third party; and
- any special, indirect or consequential losses or damages caused by Siegel’s failure to complete or delay in completing any of its obligations in this Warranty.
Limitations on Disclaimer
If the supply of the Products to you is a consumer sale pursuant to the Australian Consumer Law, the following statement applies. In the following statement, ‘our’ means Siegel and ‘you’ means the purchaser of the Products:
Our goods come with guarantees that cannot be excluded under the Australian Consumer Law. You are entitled to a replacement or refund for a major failure and compensation for any other reasonably foreseeable loss or damage. You are also entitled to have the goods repaired or replaced if the goods fail to be of acceptable quality and the failure does not amount to a major failure.
The benefits given by this Warranty are additional to other rights and remedies that you may have in relation to our Products. Any paragraph of this Warranty which is unenforceable or void is to be severed and the rest of this Warranty will remain in force.
Contact:
If you have any questions or comments in relation to this Warranty, please contact:
Siegel Customer Service
Email: [email protected]
Warranty information and forms: siegeladhesives.com.au/warranty